FURNACE

Furnace maintenance is important, don't you take your vehicle in for regular checks and oil services? You should really be getting your furnace professionally tuned at least once a year in order to prolong it's life expectancy and effectiveness. Our technicians

• Inspection: On arrival, we'll carefully inspect your gas furnace carefully note its condition.
• Cleaning: If you have a replaceable furnace filter we'll change it. If you have an electronic air cleaner or other IAQ systems we'll inspect it and clean the airstream components as needed. We'll also clean the furnace blower and control compartment.
• Lubrication: We'll lubricate any moving parts that require lubrication like motors, bearings, or fans to reduce friction and prevent noise.
• Check Ignition System: We'll inspect the pilot light assembly or ignition system and clean as necessary.
• Gas Pressure and Burner: Verify proper gas pressure and inspect burners and clean if needed.
• Blower: We'll inspect and clean the air blower as needed. We'll measure the amperage and voltage for the fan motor to ensure it is in great condition.
• Heat Exchanger: Inspect gas furnace heat exchanger for cracks, soot, and corrosion. Clean if needed.
• Venting System: Inspect the flues and ventilation system to ensure proper operation. If you have a condensing furnace, we'll check the condensation drains and any condensation pumps.
• Ductwork: Check ductwork for loose joints or hangers, and seal with mastic duct sealant as needed.
• Temperature Controls: We'll check you thermostats for proper operation. If they utilize batteries for power, we'll change the batteries.
• Complete After Maintenance System Test: We'll test run your gas furnace for several minutes. We'll check for proper temperature rise, blower operation, and burner operation.
• Clean-up: We'll pick-up our tools, remove any old filters, and thoroughly clean our workspace.
• Prepare Visit Report: We'll explain our work and document any potential problems or recommended repairs.